Barbed wire fence has been utilized by livestock owners and ranchers to protect their property and their animals. This type of fencing is made of distorted strands of wire with sharp burrs. A lot of livestock owners would use barbed wire fence and they have proven that this type of fencing is truly useful in discouraging cattle and livestock from battling the fence, in order to set free.
The barbed wire fence is extremely sharp that it could pierce and hurt the skin of the animals, so they would refrain from trying to push against the fence to get loose. Since, the barbed wire fence could be damaging, most livestock would quickly learn to stay away from the barbed wire and maintain a safe distance. They would eventually stop pushing the wire.
Now, aside from the animals, predators and even people can be dissuaded to enter in the area. If you fear that someone might attack your livestock during the night, or during the time that you are away from your house, you can depend on a barbed wire fence to keep your livestock safe and sound.
For livestock owners and ranchers who are interested to purchase and install barbed wire fences, here are some useful tips, as to how they can find the right and most suitable barbed wire fence:
• It is advised to go with high quality woven wire fence because they are made of superior tensile wire, which is sturdy and could for a long time. This wire would even look better than other barbed wire fencing that can be found on the market. Animals can be easily held in within the fence borders, without harming them.
• When you are usually out of the livestock area, it is best to install electric fences because this will keep intruders away. These fences will cause a low level of electricity when making contact with the wires. Many of these models are often operated by solar power, which is cost effective.
• If you are particular with your investment, you can go with steel fences because they are the most durable and safe barbed wire fences. They are also the most expensive type of barbed wires, but they could be truly useful for the longest time. In general, they are intended for smaller fencing jobs. They are commonly used for horses. Once you can maintain steel fences, you can use them for many years.
These are some of the types of barbed wires that you can choose from when you plan to purchase and install such wires to protect your animals and property. As a livestock owner or rancher, it is your responsibility to take good care of your livestock and animals to keep them safe and healthy all the time.
Indeed, these fences are truly helpful and useful for many livestock owners and ranchers. Just ensure to do your own research, most especially if you have little idea about these wired fences. If you want your livestock business to succeed, purchase and install the most suitable barbed wire fence that will protect your animals.
There is a saying-”good fences make good neighbors”, and it is true, but good fence also provides much needed privacy if you chose the right fence panels.
The panels for a fence are put together end-to-end in a typical ways for creating a barrier, and are the attached to fence posts for keeping them upright. In most of the cases, they are built using PVC or wood. They are available in various sizes, but are usually 6 or 8 feet tall, and about five feet wide. Mostly they are constructed for privacy. In some cases, they are constructed for keeping the animals in, and are known as cattle panels. Cattle panels are manufactured using metal and they rarely provide any privacy to the users.
PVC fence panels are latest on the market and are manufactured from PVC material. They cost more than their wooden counterparts, but are quite sturdy and do not need any maintenance. They do not need any sealing or paining or any other maintenance. They are durable and do not rust. Even though they are pricy, but their quality is evident when it is used as fencing material on any property.
Wooden varieties are one of the most favorite ones and are been around since centuries and are serving their purpose well. These panels require definitely need some maintenance, and you may have to paint them yearly. They are usually checked on the regular basis and are replaced because few of them may rot due to various reasons. Wooden panels are not that expensive and have a lifespan of about 12-15 years. Most of then are made from pressure treated wood, which reinforces the wood and makes it weather proof.
You can get fence panels in various styles and designs from simple ones to more ornate. Simples ones may have dog eared pickets that are attached side by side for creating a complete flush barrier and privacy screen. Few fence panels have ornate styles to embellish the fence itself.
Cattle panels-where to buy them?
You can get cattle panels at many agricultural supply and farm outlets.Even many online sellers provide great deals on varisuo type of fencing aterials. They are galvanized and heavy grade mesh panels. They are mostly wired to metal T-posts for erecting a semi-permanent fence and are best for keeping our large dogs. They can also be nailed to 4×4, treated wooden posts with the help of heavy-duty staples.
Majority of fence manufacturers and suppliers have their own sites and provide extensive catalogs featuring wide range of fencing types for addressing various needs of buyers. You can get fences in mesh and wire, non-electric and electric varieties. You can even take down mesh fences at the end of growing season and can roll them up for storing during winters.
Fence panels are best for dividing property and for protecting it. They can also reduce any noise emanating from the streets and provide privacy for the back yard living area. In most of the cases, they also enhance the value of property they protect.
Note: This article is intended to provide basic information and overall guidance on electric fence installation. You should always consult your fence manufacturer’s instructions and take all safety precautions before attempting to install an electric fence. If possible, consider using professional electric fence installation services and providers.
As a livestock owner one requires a fencing solution that gives him/her assurance that livestock won’t stray out of their property. An electric fence offers this solution as when it is correctly installed it gives a mild electric shock that discourages livestock from going through it. Since we are dealing with electricity care has to be take as mishandling it comes with consequences.
How it works
An electric fence is a type of an open circuit, an electric charge flows through the wires at short intervals ranging between one and two seconds. When an animal touches the electric fence it completes the circuit and electric charge flows from the fence via the animal to the ground causing shock. Depending on whether it is a short haired animal such as some cattle breeds they require a minimum of around seven hundred volts for it to be effective while for long and thick haired animals such as sheep they require a slightly higher voltage of about two thousand volts. Depending on the specific animal it may require multiple shock experiences for them to respect the electric fence.
Requirements for Electric Fence Installation
Wire cutter, this is for both cutting and stripping of wires to size.
A post hole digger.
Electric fence posts.
Hammer, screw driver and pliers.
Grounding system, that is; three six feet galvanized rods and brass clamps.
An electric fence controller.
Ten to fourteen gauge insulated wire with a tolerance of about twenty thousand volts.
Lightning protector system.
Electric fence installation
The first step is usually a precaution stage. Locate area for the ground system at least seventy five feet from any company utilities such as water and gas systems, metallic water tanks and any building metallic siding. Locate an area that has good soil and probably always moist for placing of the ground rods. Identify an area that is weather resistant for placing of the electric fence controller.
Install the electric fence controller in the identified area and leave the/use only polarized cords do not plug in/switch it on. In the selected ground area drive in the galvanized ground rods and clamp the grounding wire with the rod. This then runs to the controller, the three ground poles should be connected in series either in a straight line or forming a triangular shape. Spacing should be about ten feet. Installation of the electric fence posts, this depends on the area to be fenced. Spacing ranges between twenty five and seventy five feet, the hole digger comes in here also remember this will determine the flexibility of the wire. Installation of the wire them comes next, starting from the farthest end use tight connections and correct splices. Remember to insulate the connections to help reduce corrosion. Spacing of wires should be about eight to ten inches, choose the most appropriate maximum height depending on the nature of your livestock.
When wiring is complete use jumper wires which are of the same gauge and voltage as the main wire to connect the mains from top to bottom.
Connect the top wire to the electric fence controller; recheck your system for any mistakes. Plug in and switch on the controller there should be an indicator to show its working. Use a voltmeter to check the voltage on the wires. It is always very important to install a lightning protector this ensures that lightning does not interfere with the system.
When thinking about the type of cattle fencing to employ in your farm or ranch, there are several choices that you can make. Here’s a brief overview of the basic kinds of cattle fence that can work on most properties.
High tensile fencing is used on many ranches and farms. It is usually combined with electricity to produce an effective and economical method for cattle management. For cattle, only 2-3 of the strands need to be electrified for effective containment.
Woven wire is a nice alternative to the sturdier and more expensive fencing types. It’s ideally suited for smaller breeds and is more than effective enough to contain calves and keep out predators and other wildlife. No electricity is needed for this fencing, which utilizes small gaps to keep animals out.
Poly coat provides a highly visible fence and is often used for horses so that both horse and rider can easily see it. However, it’s also a viable option for cattle and can be electrified as needed.
Although barbed wire is quickly falling out of favor to more modern and efficient fencing, it still remains a highly economical and viable choice for cattle fencing. Nowadays, it is often combined with strands of woven wire at the top and bottom to keep cattle and sheep from climbing over or digging under the fence.
1 comment - What do you think?
Posted by admin -
October 16, 2011 at 9:56 pm
Im planning on starting a small livestock farm? and first i was wonderin wat would be the best fencing? barbed wire.or electric? and also should i start out by buying a couple calves, or should i buy like cow and calf pairs or whats the best way?i plan on buying the cattle and then selling them later down the road for money and just keep doing this. Please help. thank you!!!
Barbed wire fencing is a staple of many ranches and cattle farms throughout the country. It is an incredibly common system used to define property boundaries and contain livestock of all types. It’s principal benefit on a ranch is that it provides substantial protection at a very efficient cost because much less material is used than in other fencing types.
But barbed wire has its drawbacks. Typically, barbed wire is constructed of wire strands that are twisted together to form very sharp points. While they are incredibly effective as a deterrent, both for animals and people, barbed wire can be difficult to work with. It’s very easy to be injured by the barbs, particularly when constructing, repairing, or replacing the fencing. Animals can also be injured quite severely by the barbs, and of course the barbed wire can be a source of accidents for people as well, especially small children.
People might be surprised to know that there are some affordable alternatives to barbed wire out there. Here is a brief overview of some of the major choices.
A woven wire fence works with the same principle as barbed wire in that strands of wire are woven tightly together. Of course, there are no sharp barbs, but the high tension of the wire is very effective in containing livestock. The cost is typically a bit higher than barbed wire, but they reduce injury potential and are generally more attractive in appearance.
This is a much more expensive option than barbed wire, but steel fencing is particularly well-suited for smaller enclosures where the potential for inadvertant contact is much higher. They’re perfect for use with horses or contained livestock. Steel fences will last much longer than typical fence post setups and are extremely strong and usually injury-free.
Electric fences work by delivering a low-voltage electric shock when touched. It’s usually more than enough to teach an animal to stay on one side of the fence, and can be an effective deterrent for human trespassers as well. The voltage is, of course, non-lethal but it is extremely effective. The electrical wire is usually contained in rope or tape strips and while electric fences do require some amount of repair and maintenance, it’s usually inexpensive and the fences can last quite a long time. There is a cost to power the fence with electricity, but there are solar battery powered options available on the market today that keep these costs very low.
Hi and welcome. CattleFencing.net is your one-stop resource for everything you need to know about cattle and livestock fencing. We’re just opening up the web site, but check back here soon for everything you need for fencing supplies, product information, expert reviews and more.